When ringing in, i want to decline or mute the Call (7941, 7960, 7920 Phones).
I am using CCM 4.2. Is the Softkey Template the correct way of doing that? There are Call States (Ring In) where i am able to assign Softkeys for. But "Call End" for example is not available for Ring In. Am i looking somewhere wrong?
You are not looking in the wrong place. The "End Call" softkey can only be configured for the 'Connected" call state :( The closest thing to what you want would be to use iDivert. Have a look;
The Immediate Divert feature allows you to immediately divert a call to a voice-messaging system. When the call gets diverted, the line becomes available to make or receive new calls.
Access the Immediate Divert feature by using the iDivert softkey. Configure this softkey by using the Softkey Template Configuration window of Cisco CallManager Administration. The softkey template gets assigned to phones that are in the Cisco CallManager system.
The call that is being diverted can be in the call offering, call on hold, or call active state. The call can be incoming or outgoing. The person on the call that is being diverted will receive the greeting of the voice-messaging system of the person who diverted the call.
In the Doc, the checklist recommends to assign the created Softkey Template to a Device Pool my Devices using. There is no option available to create that assignment, whether in the System Device Pool Properties nor in the Softkey Templates ...
That note must be in error,here is the info for Device Pools in CCM 4.2.
**The Device Pool window now contains only location-related information. The Common Profile window records all the user-oriented information.
In CCM 4.2 here are the two methods for assigning Softkey Templates;
Assigning Softkey Templates to IP Phones
Softkey templates are assigned to IP Phones when the phones are configured. You can assign standard and nonstandard softkey templates. There are two ways to assign a softkey template to a phone:
Assign the softkey template to a common profile and then assign the common profile to the phone in the Phone Configuration window.
Assign the softkey template to the phone using the softkey template field in the Phone Configuration window. If a softkey template is already specified in the common profile assigned to the phone, leave the softkey template field blank in the Phone Configuration window.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...