Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

design

using CM 4.1

IPCC 4.04.

If the IPCC server was to lose power all the CTI RP would unregister. is there a way I can forward these calls to unity

in this state (with out upgrading to CM 4.2)

Thanks

1 REPLY
Silver

Re: design

On the CTI RP, configure the BUSY, NO ANSWER and Failure to where you want the call to go. Don't forget the proper Calling Search space.

You MAY be able to check the VM box for the no answer, busy, failure if that's what you want to do in your design.

Remember that Unity (if you are thinking of using a Unity Auto Attendant) only accepts the Original Called party number. So Unity will get the DN assigned to the CTI RP. You will need to put that DN on the appropriate Unity object (subscriber or call handler.)

104
Views
0
Helpful
1
Replies