Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Device Mobility

Hi All,

We are running CUCM 6.X in a cluster environment. There's one publisher and few subscribers in this cluster and phones on the respective locations register with the respective subscribers which are sitting on those locations.

I configured device mobility. When a phone moves from one location to another, on the display it says the device is in a roaming location but it does not change the device pools and register with the local subscriber. It registers with the previous subscriber.

I want to know whether when a device moves from one place to another is there a possibility of registering that device on the local subscriber of that location without manually changing the device pool of that phone to the local device pool.

Thanks.

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: Device Mobility

Device mobility don't change where is CM information provided.

DM will use some settings from dial pool:

Roaming Sensitive Settings

The parameters under these settings will override the device-level settings when the device is roaming within or outside a Device Mobility Group. The parameters included in these settings are:

Date/time Group

Region

Media Resource Group List

Location

Network Locale

SRST Reference

Physical Location

Device Mobility Group

Device Mobility Related Settings

The parameters under these settings will override the device-level settings only when the device is roaming within a Device Mobility Group. The parameters included in these settings are:

Device Mobility Calling Search Space

AAR Calling Search Space

AAR Group

More info you can find: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/6x/devmobil.html

rate if this help

Re: Device Mobility

DP is the only way to give phone information about CMs I'm afraid.

4 REPLIES

Re: Device Mobility

Device mobility don't change where is CM information provided.

DM will use some settings from dial pool:

Roaming Sensitive Settings

The parameters under these settings will override the device-level settings when the device is roaming within or outside a Device Mobility Group. The parameters included in these settings are:

Date/time Group

Region

Media Resource Group List

Location

Network Locale

SRST Reference

Physical Location

Device Mobility Group

Device Mobility Related Settings

The parameters under these settings will override the device-level settings only when the device is roaming within a Device Mobility Group. The parameters included in these settings are:

Device Mobility Calling Search Space

AAR Calling Search Space

AAR Group

More info you can find: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/6x/devmobil.html

rate if this help

New Member

Re: Device Mobility

Thank you for the reply.

Is there any other method to do this without manually changing the device pool?

Re: Device Mobility

DP is the only way to give phone information about CMs I'm afraid.

New Member

Re: Device Mobility

Thanks.

480
Views
0
Helpful
4
Replies