I have a question here. Recently our company is going to deploy Cisco IP phone 7911 series in the office area. The phone is connected to the Catalyst 4506 switch and it is powered up using the power socket (not connected to the PoE switch). Since we would like to save up our time instead configuring the switch port one by one, we use the interface range comamnd to configure in one shot. Then we only go to each cube and setup the Cisco IP phone. In the mean while we deploy the phone, we face issue from the user that they cannot connect to the network with the "Limited or No Connectivity" message. For those user facing this issue, we have not yet setup IP phone and their desktop/laptop are directly connected to the switchports with below comamnd.
The commands for the port level configuration are as below:-
Before we configured command lines switchport voice vlan 721 and qos trust dscp, everything is working fine. Users can connect to the network until we issue those command lines. It is something wrong with the VoIP command until the desktop/laptop cannot obtain DHCP IP from the server? Or we can just only issue those VoIP command once we have connected the Cisco IP phone to the switchport?
We are going to deploy the same Cisco IP Phone 7911 in other branches also. Since this is the first branch that we have started the Cisco IP phone deployment, so we would like to solve above stated first before we proceed to other branches deployment.
Please kindly advice on this issue we have faced here. Any help from you guys i really appreciated Thanks in advance.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.