Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

dial issue

Hello, 

 

I have the following issue, I want to dial a log distance call number, but to make the call work I have to dial to many times until I it works.

 

The call goes via E1 trunk.

what can this be?

 

Thanks. 

4 REPLIES

Are you using one or

Are you using one or multiples gateways?

Can you try adding the output of  "debug isdn q931" when you try to make the call.

 

Thanks.

Rolando Valenzuela.

Community Member

I only have 1 gateway. thanks

I only have 1 gateway.

 

thanks.

Try gathering the output of

Try gathering the output of the command debug isdn q931

and share it with us, also, please check this reference guide about the debug above: http://www.cisco.com/c/en/us/support/docs/dial-access/integrated-services-digital-networks-isdn-channel-associated-signaling-cas/8607-isdn-disc-code.html

 

Regards

Rolando Valenzuela.

Community Member

Rolando, I did some changes

Rolando,

 

I did some changes and know im going via a intercluster and have the same issue.

 

thanks

24
Views
0
Helpful
4
Replies
CreatePlease to create content