I want to set up a dial-peer cor list to prevent my directly attached FXS ports from dialling internationally, and to stop my SRST devices calling internationally. I have set up some cor lists etc, but find that during normal running, calls from my IP Tel phones are coming in on dial peer 0.
According to my thinking, they should be coming in on dial-peer 200, based on the destination pattern:
dial-peer voice 200 voip
corlist incoming UNRESTRICTED
corlist outgoing CCM-AND-SRST-ONLY
description 1ST PREFERENCE OUTBOUND PEER TO CCM SERVER (1ST SUBSCRIBER)
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...