Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Dial-peer errors/CSIM error

receiving error when attempting csim. Trying to configure router for SRST and calls not completing...

csim: called number = 912816740702, loop count = 1 ping count = 0

csim err:csim_do_test invalid major major(16) minor(0)

csim: loop = 1, failed = 0

csim: call attempted = 1, setup failed = 0, tone failed = 0

3 REPLIES
Silver

Re: Dial-peer errors/CSIM error

Hi, is this an H.323 or MGCP gateway?

If MGCP the CSIM command won't work as callmanager is in control. What dial-peers have you got configured for SRST?

New Member

Re: Dial-peer errors/CSIM error

What type of dial-peers voip or pots?

DO you have examples of your dial-peers

New Member

Re: Dial-peer errors/CSIM error

This is an MGCP gateway, however, the dial-peers are being tested during SRST operation. AN example of a dial-peer is:

dial-peer voice 41 pots

tone ringback alert-no-PI

description Outbound Toll-International Calls

destination-pattern 801+

progress_ind setup enable 3

progress_ind alert enable 8

progress_ind progress enable 8

progress_ind connect enable 8

clid network-number 2766797020

port 1/0/0

forward-digits extra

prefix 011

Thanks,

Mike

501
Views
0
Helpful
3
Replies
CreatePlease to create content