Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Dial-peer for multiple voice ports

Hello guy,

I want to kwon if there is a way to configure, one dial-peer for multiple FXO voice port to make call to PSTN.

I have a VIC-4FXO and i need to create for Dial.peers for my dial plan

Is there a way to include all FXO port in one Dial-peer to make PSTN Call.

I have a huge list of Dial-peer, i dont want use 9T becase im using Cor List.

Thanks.

6 REPLIES
Green

Re: Dial-peer for multiple voice ports

Use trunk-group feature.

Not sure if they work for FXO...

If not use preference option for each dial-peer

Hall of Fame Super Gold

Re: Dial-peer for multiple voice ports

Sure, trunk-group will work with FXO.

It will give you:

* simplified configuration

* multiple trunk targets under the same DP

* many options to hunt scheme the lines

* nice statistics.

Better than that, there is only cold beer :)

New Member

Re: Dial-peer for multiple voice ports

thanks, i was trying but not working, do you have some example for do it with FXO

Hall of Fame Super Gold

Re: Dial-peer for multiple voice ports

voice-port 0/0/0

trunk-group fxo

voice-port 0/0/1

trunk-group fxo

dial-peer voice 100 pots

trunkgroup fxo

This is the minimum. You can also configure "trunk group fxo" in global mode if you want a non-default hunt scheme.

Hope this helps, please rate post if it does!

New Member

Re: Dial-peer for multiple voice ports

its done, i have now working my peers with trunks, thanks a lot guys.

Hall of Fame Super Gold

Re: Dial-peer for multiple voice ports

Glad to know that worked, good luck!

As a courtesy to those providing answers, please rate all useful posts using the scrollbox below!

722
Views
14
Helpful
6
Replies