Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Dial-Peer with Prefix Giving Second Dialtone - CME

Hello All,

I'am having an issue with a dial-peer I having giving an additional dial tone to request more digits, this is CME. I'am implimenting 4 digit dialing. A remote location has DID's with the last 4 of 52XX, I want to dial 52XX and get it changed to the full number. I have blocked out the area code and the first 3 digits of the remote location number in the following dial peer. When I dial 5200 I get a second dial tone from my CME and then if i dial 5200 again it works, why am I recieving the second dial tone? Thanks

dial-peer voice 2006 pots

destination-pattern 52..

port 0/1/0:23

forward-digits 10

prefix ******

1 REPLY
Hall of Fame Super Gold

Re: Dial-Peer with Prefix Giving Second Dialtone - CME

On the remote location CME, configure:

dial-peer voice 1 pots

incoming called-number .

direct-inward-dial

553
Views
0
Helpful
1
Replies
CreatePlease to create content