Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Dial-Peer

Hi

I got couple of dial-peer in my configuration, donno which is used for incomming and outgoing.

During an active call is it possible to get the dial-peer information.

Sip phone vendor wants to enable rtp encryption on CME, any help on it

cheers

TOM

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Re: Dial-Peer

dial-peer voice 11 voip is your incoming dial-peer and the rest are outgoing..

Hope this helps....

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
4 REPLIES
VIP Super Bronze

Re: Dial-Peer

Can you post your dial-peer  config here...

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
Community Member

Re: Dial-Peer

Hi,

Here it is....

dial-peer voice 11 voip
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target sip-server
incoming called-number .%
dtmf-relay rtp-nte
no vad

dial-peer voice 12 voip
   destination-pattern 9……….
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
no vad

dial-peer voice 13 voip
   destination-pattern 9011T
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
no vad


dial-peer voice 104 voip
destination-pattern 9[6]......
voice-class codec 1
session protocol sipv2
session target ipv4:192.168.1.100
incoming called-number ....
dtmf-relay sip-notifydial-peer voice 100 voip
description dial peer digital toward CUE
no voice-class sip g729 annexb-all
session protocol sipv2
incoming called-number ....
dtmf-relay sip-notify
codec g711ulaw
!
dial-peer voice 101 voip
description dial peer digital toward CUE
destination-pattern 9[11]......
voice-class codec 1
no voice-class sip g729 annexb-all
session protocol sipv2
session target ipv4:192.168.1.100
incoming called-number ....
dtmf-relay sip-notify
!
dial-peer voice 102 voip
destination-pattern 10..
voice-class codec 1
no voice-class sip g729 annexb-all
session protocol sipv2
session target ipv4:192.168.1.100
incoming called-number ....
dtmf-relay sip-notify
!        
dial-peer voice 133 voip
destination-pattern 9[00]..........
voice-class codec 1
session protocol sipv2
session target ipv4:192.168.1.100
incoming called-number ....
dtmf-relay sip-notify
!
dial-peer voice 135 voip
description dial peer digital toward CUE
destination-pattern 95..........
no voice-class sip g729 annexb-all
session protocol sipv2
session target ipv4:192.168.1.100
dtmf-relay sip-notify
codec g711ulaw
!

VIP Super Bronze

Re: Dial-Peer

dial-peer voice 11 voip is your incoming dial-peer and the rest are outgoing..

Hope this helps....

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
Hall of Fame Super Gold

Re: Dial-Peer

Sip phone vendor wants to enable rtp encryption on CME, any help on  it

Impossible with third-party phones.

270
Views
0
Helpful
4
Replies
CreatePlease to create content