Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Dial Peers and Digit Manipulation

What is the order of operations on dial peers that use digit manipulation and voice translation profiles?

I'm studying from the CVOICE book, Third Edition by Kevin Wallace. I think there is a ton of errata in here but the errata hasn't been updated it seems.

I'm concerned with when dial peers are matched, both inbound and outbound, versus when the digit manipulation is applied, either through basic digit manipulation or voice translation profiles.

Thanks for any help you can provide.

  • IP Telephony
3 REPLIES

Re: Dial Peers and Digit Manipulation

inbound pots>> port-translation profile> numberexpansion after DP match CLID and dial-peer teranslation profile

voip inbound >>global translation-profile>>num exapnsion >>after DP match>> CLID >>DP translation-profile

pots outbound>>DP translation>>CLID>>prefix-digits/forwad-digits

voip outbound>>DP translation>>CLID

good luck

if helps Rate

New Member

Re: Dial Peers and Digit Manipulation

Ok, I think I know where I was getting confused.

There are translation profiles bound at both the port and dial-peer level. Is that correct?

Re: Dial Peers and Digit Manipulation

yes,

for inbound the port will be processed first

HTH

351
Views
0
Helpful
3
Replies