Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Dial Peers issue

Hello,

       I have the numbers which are 7 digit  8002111,8042222 and they are working good with the below configuration.

dial-peer voice 800 voip

description ** Outgoing Calls Toll Fr

translation-profile incoming dialed

destination-pattern 98[024].....

translate-outgoing calling 1

translate-outgoing called 2

session protocol sipv2

session target ipv4:10.21.20.49

dtmf-relay rtp-nte sip-notify

codec g711alaw

no vad

I also have one more number which is 10 digit 8002490123 and I want my users to be able to dial both the 7 digit and 10 digit numbers.

How can I make a dialpeer

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Dial Peers issue

If you are going to use same dial-peer then put this in:

destination-pattern 98[024].....T

If you want to keep this one then add T as I said and create another dial-peer with exact 10 digit match like:

destination-pattern 98[024]........

HTH,
Dragan

HTH, Dragan
3 REPLIES
Silver

Dial Peers issue

If you are going to use same dial-peer then put this in:

destination-pattern 98[024].....T

If you want to keep this one then add T as I said and create another dial-peer with exact 10 digit match like:

destination-pattern 98[024]........

HTH,
Dragan

HTH, Dragan
New Member

Dial Peers issue

     Thanks I did not created the a 10 digit dial peer I jsut used T on the existing dialpeer. Can you please le me know what T denotes and when it should be used.

Silver

Dial Peers issue

T is for interdigit timeout...so when you have match on dial-peer (not exact match in digits ie some digit pattern is matched) that dial-peer waits to see whole entered numbers and then send digits out. It's used in variable length dial-plans...

So for example in your dial-peer you could enter only 98[024].T and it should work just fine.

HTH,
Dragan

HTH, Dragan
68
Views
0
Helpful
3
Replies
CreatePlease to create content