I am trying to learn Cisco VoIP on my home network but no matter how much I read, I'm having trouble figuring out dial plans. I have figured out that since my house has 10 digit dialing, the numbers leaving my house will nly ever start with 0,1,4,6,9 so I thought that I should be able to use 2xx for internal extentions and have anything else go to my SIP trunk but I can't seem to figure out how to do this.
I'm sorry. Like I said, I still trying to learn. When I pick up the phone and dial a number, does it have to match a dial plan exactly or does it just take the first match? What I would like is that when I dial 200, it will send me to my local extension 200, but anything else will go out to my SIP provider. I'm just not sure how to do this.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.