Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Dial soft key is not activate.

Hello all,

I have a new problem in my site, when user try to dial by enter the extension then press dial soft key , this message appeare " That key is not active here"

Our system is CME 7.1 on 2911 ISR. What is the problem?

Thanks a lot......

6 REPLIES

Re: Dial soft key is not activate.

Hi, may be your primary DN of the phone is not working properly, can you make dial by off-hooking the phone/pressing the speakerphone button first and dial the desired number first?

It's better to analyze if you post your CME configs here.

HTH.

New Member

Re: Dial soft key is not activate.

the customer

want to dial with the previouse way, for urs information the ip

phones are 7911.

thanks a lot any new ideas.

Re: Dial soft key is not activate.

Hi Ahmed, no worries on dialing method, just have a test with the method to check the functionality only.

New Member

Re: Dial soft key is not activate.

THANKS MR.Rahman.

But the problem that the customer recommend that method,

It may be manufactoring problem?!!!!!!!!!!!!!!!

New Member

Re: Dial soft key is not activate.

Hin no new ideas?

Re: Dial soft key is not activate.

Hi Ahmed, please post your CME config here. Second, please have a TEST CALL with the method of off-hooking the handset or pressing speakerphone first and then dialing the desired#, and post what you have seen.

381
Views
0
Helpful
6
Replies