Dialplan query

[cm6043]

Hi all,

Can I use the following destination-pattern 10 When I dial 108888 to remote site ?

dial-peer voice 10 voip

destination-pattern 10

session target ipv4:172.29.219.1

Thanks

Man

[KonradStepniewski · Accepted solution]

No, you have to extend your destination-pattern information.

One way could be to use: destination-pattern 10.... if you have fixed number of digits or 10T if there is more digits to come.

I would recommend to read whole document: http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/dial_peer/dp_confg.html#wp1067900 + find information about wildcards used by dial-peers.

rate if this help

[cm6043]

Hi KonradStepniewski

Thanks for your helpful information

Leung Che Man