Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Dialplan query

Hi all,

Can I use the following destination-pattern 10 When I dial 108888 to remote site ?

dial-peer voice 10 voip

destination-pattern 10

session target ipv4:172.29.219.1

Thanks

Man

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Dialplan query

No, you have to extend your destination-pattern information.

One way could be to use: destination-pattern 10.... if you have fixed number of digits or 10T if there is more digits to come.

I would recommend to read whole document: http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/dial_peer/dp_confg.html#wp1067900 + find information about wildcards used by dial-peers.

rate if this help

2 REPLIES

Re: Dialplan query

No, you have to extend your destination-pattern information.

One way could be to use: destination-pattern 10.... if you have fixed number of digits or 10T if there is more digits to come.

I would recommend to read whole document: http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/dial_peer/dp_confg.html#wp1067900 + find information about wildcards used by dial-peers.

rate if this help

New Member

Re: Dialplan query

Hi KonradStepniewski

Thanks for your helpful information

Leung Che Man

103
Views
0
Helpful
2
Replies
CreatePlease to create content