I'm new to CUCM and have, what I think, is an interesting dilimia. I have a user who wants me to setup a local DID number and have it forwarded to an 855 number. I'm think i can use a translation pattern to accomplish this? I was going to setup a DID and forward all calls to the 855 number, but thought there would be a better way.
Please let me know what you guys think the best way to accomplish this!
Many options as Rob outlined (+5 my friend). In addition depending on the protocol used by the GW you can perform the translation directly there and bypass CUCM all together, but GW needs to be running H.323 or SIP not MGCP.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...