05-09-2008 09:49 PM - edited 03-15-2019 10:34 AM
Dear sir
I have PRI number 5205521. and DID are map on my PRI number .I m using H.323 ,i can easily call to PSTN , but when i tried to call on my internal IP phone call get disconnected automatically.
PRI number is 5205521.
DID numbers are 52087XX
My IP phones number are 8701 ,8702 etc.
i am unable to call on my IP phones.
I am attaching my Runing configuration , and debug out put, plz help me out.
I m using four number internal dial plan.
I have also tried with
voice translation-rule 1
rule 1 /2152087../ /87../
I have attached Running-config and debug .
thanks
Solved! Go to Solution.
05-17-2008 08:49 PM
What resolved it? Don't leave us hanging! lol
05-10-2008 04:30 AM
Hi, I think translation rule should be:
rule 1 /^21520/ //
Haven't checked your config beside that.
05-10-2008 04:36 AM
kindly check config. as i have tired rule 1/^21520/ // also.
05-10-2008 04:41 AM
Seems fine. Check with "debug isdn q931" and "term mon" which number are you receiving. The you can also check with "debug ccapi" what happens with the call.
05-15-2008 09:16 AM
-deleted-
05-15-2008 10:30 AM
how many digits is the telco sending to you?
many of them already send the last 4 digits so you don't need to apply any translation rules
a debug would tell you that
HTH
javalenc
if this helps, please rate
05-15-2008 07:43 PM
thanks its resolve.
05-17-2008 08:49 PM
What resolved it? Don't leave us hanging! lol
05-18-2008 09:48 PM
:-) actually Telco was not sending the 4 digits ;-)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide