Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DID

Hi all,

I have configured a 3800 router and the call Manager 4.0

I have DID configured but i rather use connection plar opx for the direct line.

when i call from outside (21202285) it gets alright to the extension (5200).

I want only the user of extension 5200 to use the number 2122202285 to dial outside.

Can u help?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: DID

My bad, at times I'm too focused on the CME.

The below works with both CCM and CME:

http://cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml

Please rate all post especially the useful ones.

4 REPLIES
Hall of Fame Super Gold

Re: DID

One method (there are others), is the trunking support for ephones:

http://cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00806a803b.html

Please rate useful posts.

New Member

Re: DID

Hi

Thanks for the reply.

The documentation on the link is about CME

I have a CCM not a CME.

and the 3800 router is my Voice Gateway.

I will appreciate any additional help.

Hall of Fame Super Gold

Re: DID

My bad, at times I'm too focused on the CME.

The below works with both CCM and CME:

http://cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml

Please rate all post especially the useful ones.

New Member

Re: DID

Hi Bevilacqua,

This was really helpful.

My problem has been solve.

Thanks

Eric

124
Views
0
Helpful
4
Replies
CreatePlease to create content