Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DID

Hi All

I have configure DID and map the ouside number to the phone with the command bellow.

"voice translation-rule 1

rule 1 /^7/ /17/

voice translation-profile Phone1

translate called 1

voice-port 0/3/1

connection plar opx 5200"

The idea is to cease the line for only extension 5200.

I have noticed that some other users use the PSTN number mapped to ext 5200 to make ousite call.

Could you please help me reserve a unique PSTN number for Ext 5200 so that other user could not use it?

Thanks

Eric

3 REPLIES
Hall of Fame Super Gold

Re: DID

Is this CCME?

If so please look at the command trunk under ephone-dn.

Else see: http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml

Please rate usefuls posts.

New Member

Re: DID

hi

it is a CCM 4.0

thks

Hall of Fame Super Red

Re: DID

Hi Eric,

Have you looked into this setup, it looks like what you are after;

Direct FXO Trunk Lines Overview

From this doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00806a803b.html#wp1055600

Hope this helps!

Rob

93
Views
0
Helpful
3
Replies