Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Difference

Hi.

What's differente between Region and Location?

Thanks

2 REPLIES
New Member
Cisco Employee

Re: Difference

regions define which codec will be used between other regions and are used at the device pool level

the location is used for Call Admission Control to set a max BW that can be used for calls (to and from this location towards other locations), this is usually used over WAN connections where only a limited amount of calls can be done due to BW restrictions

they work together as for the max BW you need to know the codec you will use.

ie

if you will use G711 and want 5 calls you need to calculate

80 kbps (rtp stream + layer 2 overhead) * 2 * 5 = 800 kbps

if you're going to use G729 it's 20 kbps per stream (2 streams per call)

HTH

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
108
Views
0
Helpful
2
Replies