Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Digit Manipulation on calls from OCS

I have a Microsfot OCS server connected to my CUCM 6.1 server via a SIP trunk in CUCM.

OCS sends the + sign on calls into the cisco. I want to remove the + and replace it with a 9.

Thank you

5 REPLIES
Red

Re: Digit Manipulation on calls from OCS

Uou should be able to strip/prefix digits on CUCM > Device > Trunk > Inbound Calls.

Michael

http://htluo.blogspot.com

New Member

Re: Digit Manipulation on calls from OCS

Call Routing Information

Inbound Calls


Forgive me if I am missing something here but this is from the CUCM > Device > Trunk > Inbound Calls. and I dont see where I would strip the + and add a 9.

Red

Re: Digit Manipulation on calls from OCS

Strip => "Significant Digits"

Prefix => "Prefix DN"

Michael

New Member

Re: Digit Manipulation on calls from OCS

Not all calls coming accross the SIP trunk have a leading + sign. I only want to strip it from the calls that do. The other issue i have is that I only want to add the 9 to the calls that have the + removed. Can I do this in CUCM or and I going to need CUBE/gateway to do that?

Red

Re: Digit Manipulation on calls from OCS

I think you should consider "Number Normalization" on OCS.  It's very difficult for CUCM to handle the inconsistnecy from the same source.

Michael

203
Views
0
Helpful
5
Replies