Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Digit Translation, Why doesn't this work?

I see on several sites a simple digit translation command and they say it works but when I enter it into my 2610XM (CME 4.0.1.0) amd my 2851 (CME 8.6), they both get me the error below.

Command:

     LAB_2610XM(cfg-translation-rule)#rule 1 /2535551.../ /4.../

Error

LAB_2610XM(cfg-translation-rule)#rule 1   /2535551.../  /4.../              

                                                                                 ^

% Invalid input detected at '^' marker.

If I remove the wildcard it works fine.  But if an 11 digit number I get a 5 digit result.  Am I doing something worng or arre the websites wrong? Or, is this command for CUCM only?

If I enter the command:

rule 1   /2535551.../  /7/  

it works but my results are:

Original number: 2535551000     Translated number: 7

Original number type: none      Translated number type: none

Original number plan: none      Translated number plan: none

As you can see, my last three digits do not come over in the translation

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re:Digit Translation, Why doesn't this work?

Please visit the link below for more information on translation rules.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmedialp.html

HTH Regards, Yosh
VIP Red

Digit Translation, Why doesn't this work?

(Without testing) I believe it should be (using number slicing):

rule 1 /^253551\(...\)/ /4\1/



=============================
Please remember to rate useful posts, by clicking on the stars below. 

=============================

Please remember to rate useful posts, by clicking on the stars below.

4 REPLIES

Re:Digit Translation, Why doesn't this work?

Please visit the link below for more information on translation rules.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmedialp.html

HTH Regards, Yosh
VIP Red

Digit Translation, Why doesn't this work?

(Without testing) I believe it should be (using number slicing):

rule 1 /^253551\(...\)/ /4\1/



=============================
Please remember to rate useful posts, by clicking on the stars below. 

=============================

Please remember to rate useful posts, by clicking on the stars below.

Community Member

Digit Translation, Why doesn't this work?

That did it.  lots of web sites got that one wrong but here it is right!

Thank You!!!

VIP Red

Digit Translation, Why doesn't this work?

Thx Michael,

just remember, this is where the top dogs live


=============================
Please remember to rate useful posts, by clicking on the stars below. 

=============================

Please remember to rate useful posts, by clicking on the stars below.

208
Views
0
Helpful
4
Replies
CreatePlease to create content