Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Digits are not passed to the ccm in mgcp configuration

Hi,

I configured the new PRI with mgcp.When i dial the DID number the calls get conncted to the router and giving the dial tone,its not passing the digits to the call manager.

Thanks,

gnan.

3 REPLIES
Silver

Re: Digits are not passed to the ccm in mgcp configuration

What the output of "show ccm-manager" looks like? Does it show "registered" with the IP address of the CCM? Have you tried to reset the MGCP?

router(config)#no mgcp

router(config)#mgcp

MK

New Member

Re: Digits are not passed to the ccm in mgcp configuration

Hi,

Now i reconfigured to h.323.After that also i am facing the same problem.Calls are hitting the router,and immidiately giving the dial tone.then i dial the extension,i am able to reach the extension.But idealy the calls should be reach without diaing number ,after the call reached the router.

Thanks,

Gnanesh

Silver

Re: Digits are not passed to the ccm in mgcp configuration

Post a DEBUG ISDN Q931 also have you configured Direct-inward-dial on the POTS and incoming called-number.

dial-peer voice 2 pots

incoming called-number .

direct-inward-dial

port 0/0:23

96
Views
0
Helpful
3
Replies
CreatePlease to create content