Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Direct FXO analog line configuration

Dear All,

I am running CME 7.1

Having one E1 line and 8 Fxo ports.

E1 line is configured properly and the DID/DOD extensions are assigned to the ip phones.

Now i need to configure the 8 FXO ports in such a way  that the second button on the 7942 ip phones should have a direct analog number for making outgoing and incoming calls.

for example fxo port 0/1/0=4123145 (Analog number) directly assigned to ip phone 7942 second line button.

Please let me know how i can accomplish this task i will be very greatful to all the members.

Please let me know if you need furture clarification.

Please find attached running configuration of my CME router.

Await your response.

Your consideration in this regard will highly be commendable.

Best Regards,

Malik.

Everyone's tags (4)
1 REPLY
Cisco Employee

Direct FXO analog line configuration

Hello,

Please try the example from the following link:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmebasic.html#wp1036976

HTH,

Alex

*Please rate helpful posts

1397
Views
5
Helpful
1
Replies
CreatePlease to create content