Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Disable Pulse Dialing on FXS port

Hello

A customer is having problems with analog phone that are connected to FXS ports on a VG224 (SCCP). The phone is dialing using DTMF. Unfortunately after gonig off-hook the phone sends a pulse dialed "1" to the VG224 (see attached log). Is there a command to disable pulse dialing completely on the VG224 or is it possible configure a delay so that (pulse dialed) digits in the first 500ms will be ignored?

Any input is welcome and many thanks in advance

Kind Regards

Stefan Christen

2 REPLIES
Hall of Fame Super Gold

Re: Disable Pulse Dialing on FXS port

I don't think it's possible to do that.

New Member

Re: Disable Pulse Dialing on FXS port

Hi Paolo,

For the sake of completeness: Disabling Pulse Detection should be supported in a release that's soon available.

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsy16039

Regards

1397
Views
0
Helpful
2
Replies