Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

disable voice ports in VG224(sccp)

Hi, I have  a problem in the CUCM version 6.

The  problem is that the cpu is very high, a TAC engineer tells me it's because I  have many ports on the VG224s (50 devices)  without giving an extension, the engineer  recommended that I disable unused ports.

As I do to disable this ports   of VGs?


thanks
Julio
 
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: disable voice ports in VG224(sccp)

Yes, shutting down the port will prevent it from

attempting to register with the CUCM. You

can also issue shutdown on the pots dialpeers

corresponding to those ports not in use and

service stcapp.

Infact should not have those dialpeers to begin

with.

3 REPLIES
Cisco Employee

Re: disable voice ports in VG224(sccp)

To disable ports on Vg224:

login and get into the priv exec mode

configure the voice-port you wish to disable

perform a shut on that port

New Member

Re: disable voice ports in VG224(sccp)

thank you .
if  I put a port in shut, the port stopped trying to register on the ccm?

thanks again


Julio
Cisco Employee

Re: disable voice ports in VG224(sccp)

Yes, shutting down the port will prevent it from

attempting to register with the CUCM. You

can also issue shutdown on the pots dialpeers

corresponding to those ports not in use and

service stcapp.

Infact should not have those dialpeers to begin

with.

1505
Views
15
Helpful
3
Replies
CreatePlease to create content