Is it possible to disable call forwarding setting from call manager so that , this will be pushed on all instruments connected to this call manager. So that end user will not be able to forward his calls to other instrument.
Re: disabling Call forward facility in call manager
You have a few options.
a. To disable call forwarding from the phone itself, you can set a CSS which has no access to internal phone partitions nor route patterns to dial outside.
b. To disable users access to call-forwarding from the web user interface, you can disable this setting from Enterprise parameters. The next time users log in he wont see that option show up on the webpage. This is a global setting.
c. You can optionally set a custom softkey template and remove Cfwdall option in the Phone Idle state and apply that softkey template to all phones. This will totally remove the Cfwdall option from the phone.
d. Combine options b and c you will completely deny access to any user/phone to call forward his phone to another destination number.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...