I use CCM 4.1 with MGCP non-ios gateway (Cisco 6509).
When I make a call from IP-phone to PSTN analog phone and analog phone busy, automatic telephone exchange send DISCONNECT message with PI to Gateway, but Gateway don`t send RELEASE message to automatic telephone exchange.
I know, that in H.323 Gateway we can use disc_pi_off command, but what I can to do with non-ios mgcp gateway?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...