Disconnect tone on local and remote calls via E1-trunk instead of "idle"
Is it possible to have disconnect tone (busy tone, reorder tone) on local calls (between 2 IP phones) and remote calls made via gateway's E1-trunk (MGCP gateway) instead of becoming "idle" for Cisco IP phone when remote party hangs up? IP-telephony server is CUCM 8.6, gateway is Cisco 2911.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...