Display a name against a Hunt Group on CCM5.1

[richb1971]

Hi all,

Is it possible to display a name against a Hunt Group so users know what number was dialled?

ie Main Line displays "Main Line"

Cheers

Rich

[Rajesh Revuru]

Do you mean, when they dial extension 1000 should it display "Name Here" on the calling party phone?

[Rajesh Revuru]

***Duplicate**

[Rajesh Revuru]

**Duplicate**

[richb1971]

Sorry-I mean the IP phone would display "Main Line" when an external party dialled the main line pilot number. They have no spare buttons on the phone so the Main Number is delivered to various phones but they can't tell if its a direct call to their DN or a call on the Main Line number.

[richb1971]

Can anyone help with this one?

Cheers

Rich

[Jaime Valencia]

currently there is no support for a calling name in an AC configuration to determine if the call was made to the pilot point or directly to the phone

HTH

[Rob Huffman]

Hi Rich,

Have a look at the ideas in these two good threads;

From Bill;

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cbf34b2/0#selected_message

From David and Shanky;

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dde6a28/2#selected_message

Hope this helps!

Rob