I have this user that wants to know by which provider her calling is being routed. We have an H323 gateway with several dial-peers with preferences. So If one trunk group is full call will be routed through the next.
Is there anyway to display in the phone display a name to identify by which trunk the call is being placed? No matter if the called number is no longer shown.
I don't think that's possible, once the call goes out from CUCM all the handling is done in the GW and CUCM has no idea of anything else related to where and how the call is routed in H323. You only get the H245 and H225 signaling related to establishing the call but none of that has the info of which carrier you're using.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...