cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1083
Views
0
Helpful
5
Replies

Display FAC in CDR

dsegura11
Level 5
Level 5

Someone know if in the CCM 5.0(4) version , the FAC is displayed in the CDR, i know that in the 5.1(3)version it can but i think that this is an unsupported feture in the version 5.0(4)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/5_1_3/car/caranrpt.html

5 Replies 5

Jaime Valencia
Cisco Employee
Cisco Employee

AFAIK the DB scheme is the same for the 5.x version so the FAC should be in there

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

Hi javalenc,

Please check the document Getting Started with CDR Analysis and Reporting, it is diferent in the part of Display FAC in CDR because it apears only in the guide of the 5.1(3) version.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/5_0_4/car/caranrpt.html

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/5_1_3/car/caranrpt.html

think ur right, the doc for handling the reports only show CMC as an option

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/5_0_4/car/carsyrpt.html#wp1086010

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

dweiner
Cisco Employee
Cisco Employee

I just loaded up 5.0(4) and don't see an option for "Display FAC in CDR". That comes in with 5.1 service parameters.

Don

theeradej.s
Level 1
Level 1

now I have problem CUCM5.1 CDR csv export is not included FAC.

I already choose In the Clusterwide Parameters (Device - General), Diaplay FAC in CDR set to "True"

But in the CDR export csv file is not shown FAC in any colume.

Is there is anybody found the same problem like this?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: