Display Forwarded Call Information for an External Caller
7962 IP Phones
When IP Phones are forwarding to other IP Phones, we are able to display the forwarding station information. We do this by checking the "Caller Number" and "Caller Name" under the "Forwarded Call Information Display" section on the DN. Oddly, this does not work when are calls coming in our MGCP gateways. Any ideas? The calls appear to be direct calls to the IP Phone instead of a forwarded call.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...