Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
New Member

Display Name on incoming SIP URI calls, how to display domain suffix?



we have cucm 10.5 with jabber 10.5 connected with a sip trunk to VCS 8.2. When an external sip uri call, for example is routed through the VCS to the CUCM and then to my Jabber for Windows, the call popup and also the call windows displays only the firstname.lastname, which is the display name for this calling party in the sip invite message to the CUCM.

From: " steffen.bruening" <>

Is there a chance to display instead the full URI with domain suffix?

On Sip Trunk and CSF devices "Use FQDN names" is enabled in the SIP Profiles.

New Member

I have the same problem.When

I have the same problem.

When I look at the traces the INVITE from the VCS is correct with (Calling Party),

and the Device INVITE Displays Jens.Lantermann@<<cucm-IP>>.


Has andbody solved this problem?

New Member

i have the same issue,did

i have the same issue,

did anyone solved this problem?

New Member

I have found the solution of

I have found the solution of our problem.

I need to enable "Use FQDN names" in any SIP Profile who should use the full FQDN.

Then everything works.

CreatePlease to create content