Description is not used for any display on phones, alerting name is used on the calling party when it is calling the phone. For example phone A calls phone B, while phone B is ringing alerting name of phone A is displayed on phone B. display filed is used when phone answers and as caller ID.
Is this a shared line appearance that you are changing by any chance?
It is a shared line appearance and when I dug deeper I found the Line x on Device SEPXXXXXXXXX block and was able to change the information and had to do it for all devices the dn showed up on. Thanks for your assistance though.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...