Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DMA problem database validation failed

I ran DMA today to in order to foresee issues before the actual upgrade takes place which is in about 3-4 weeks -4.1(3) to 6.1-

I good a validation error:

The results are : Export - Successful. Validation - Failed.

I tried to look at the datavalidation.log file, but I cannot find it anywhere. It isn't there.

What other log can I look at? What could be wrong?

Any help will be greatly appreciated.

Thanks in advance.

2 REPLIES
Green

Re: DMA problem database validation failed

Check for the following log files on the publisher where DMA has failed:

C:\CiscoWebs\DMA\Bin\*.log C:\Program Files\Cisco\Trace\DBL\installdb*.*

If there is any mention of the database failing validation look at installdbw1.log

Search for the string *Error* and use the following page to decode whatever Informix errors may be present.

All messages marked *Warning* can safely be ignored.

http://www.oninit.com/errorcode/index.php

I would recommend you opening a TAC case

since there are 1000 things which can be wrong

Just for reference:

For DMA install errors:

Check the following logs:

C:\Program Files\Common Files\Cisco\Logs\DMA\

C:\Program Files\Common Files\Cisco\Logs\DMA\DMAInstUI.log

C:\Program Files\Common Files\Cisco\Logs\DMA\\InstallUtils.log

C:\Program Files\Common Files\Cisco\Logs\DMA\IDSInstall.log

C:\Program Files\Common Files\Cisco\Logs\DMA\dbcmds.log

C:\Program Files\Common Files\Cisco\Logs\DMA\dbcmds.log

New Member

Re: DMA problem database validation failed

Thanks. That's exactly what I did (open TAC case)

Carlos.

167
Views
0
Helpful
2
Replies