Cisco 1760 Gateway: supported VICs differ between 4.x and later.
Errors in DMA process related to Cisco 1760 gateway, reported similar to the following:
MGCPSlotConfig 2008-10-24 21:33:46
Row: 20 SQL error: -746(4202)
Warning message (Business Rule Violation): This VIC card is not
allowed for this gateway, under specified slot position and
Upgrade from Windows version when a Cisco 1760 Gateway exists and is configured with one or more modules that are not available in 5.x or later versions.
Further Problem Description:
There is a problem with the configuration files used in Cisco Unified Communications Manager versions for the Cisco 1760. Some entries only appear as valid in version 4.x. Updated configuration files are needed to continue with the upgrade process. Status
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...