Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

DND Enable/Disable Issues

Hi,

I'm using a Cisco 2821 with CCME on IOS 12.4(24)T1 with SCCP to the phones and a SIP proxy for PSTN access. The phones are 7940s and 7960s.

When a user hits the DND button they can turn it on but not back off. Hitting the DND button a second time does nothing. Here is some info on a phone with the problem.

Cisco 2821

CCME

12.4(24)T1

ephone-dn 21 dual-line

number 8730 no-reg both

label John Doe 8730

description John Doe

name John Doe

allow watch

call-forward busy 8999

call-forward noan 8999 timeout 23

ephone 21

description John Doe

mac-address 001B.XXXX.XXXX

ephone-template 1

username "John Doe" password null

type 7940

button 1:21

pin 12345

ephone-template 1

softkeys hold Newcall Resume

softkeys idle Newcall Redial Cfwdall Pickup

softkeys seized Redial Endcall Cfwdall Meetme

softkeys alerting Endcall

softkeys connected Hold Endcall Trnsfer Confrn

keepalive 60

type 7940

Any ideas or help is appreciated.

Thanks.

3 REPLIES
Hall of Fame Super Gold

Re: DND Enable/Disable Issues

I've heard of this already and suspect is a bug.

You can try for example, 12.4(22)YB4, same CME 7.1.

Re: DND Enable/Disable Issues

Hi Jamie,

Kindly i don't find the DND softkey in your ephone-template 1

A same scenario occur in SIP registered phones if it is enabled on configuration but not existing in the softkeys,but I see you are using sccp

So I think you can try it with a default template that I have the same ios version with the same 2821 but didn't face this issue

Hall of Fame Super Gold

Re: DND Enable/Disable Issues

Hmmm DND not in template but still shows up ?

bugs more bugs who wants bugs ?

329
Views
0
Helpful
3
Replies