We are running CME 4.2(0) and have several phones configured. Now our users keep putting the phone in DND and do not have the option to remove it.
In order to fix this, I have to delete the phone and readd it. Now this is happening at least twice a day. I watched several users and it appears. when a call comes in, they have the option to answer it or it displays a DND. They are hitting the DND by accident.
I configured a phone templete and I did not put DND in it.
I found a link to the phone templates for CME. Once i found that, i found the issue. I removed the DND from the idle list but the ringing list still had DND enabled. I didnt set it there so it was taking the default.
This is how they were getting into DND but then had no option to remove it.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...