Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DND no longer works on CME since upgrade to 4.3 IOS 12.4(15)XZ

Hi,

since we upgraded from CME 4.0 to 4.3 with 12.4(15)XZ DND deos not work on the 7905 phones.

It worked prior to the upgrade and continues to work on the 7940/7960's. You press the DND softkey and nothing happens.

Can anyone provide any advice on how to resolve this?

Thanks,

Chris

3 REPLIES
Silver

Re: DND no longer works on CME since upgrade to 4.3 IOS 12.4(15)

Send the following from CME:

show run

show ver

show ephone reg

show ephone dnd

New Member

Re: DND no longer works on CME since upgrade to 4.3 IOS 12.4(15)

I have seen this before with an earlier version of CME. Did you upgrade the phones as part of the upgrade? Ensure you are using the correct phone load for CME 4.3.

New Member

Re: DND no longer works on CME since upgrade to 4.3 IOS 12.4(15)

Yes we are using the correct load for the 7905 phones.

Its very odd - I enabled FAC standard and **7 can be used to set DND but the softkey still doesn't work.

I will upload further details.

Regards,

Chris

115
Views
1
Helpful
3
Replies
CreatePlease login to create content