Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

DND sofkey not working after IOS upgrade for CME 4.1

I recently upgraded to IOS 12.4(15)T3 for CME 4.1. The softkey DND has stopped working. The button has no effect if IP Phone is connected, ringing or idle. Not sure if anyone else is having this problem.

5 REPLIES
Hall of Fame Super Gold

Re: DND sofkey not working after IOS upgrade for CME 4.1

Hi, suggest you use instead 12.4(11)XJ4 that has very few know issues.

New Member

Re: DND sofkey not working after IOS upgrade for CME 4.1

I just noticed that the DND does work on a few of the IP Phones. There is only one ephone-template and all of the IP Phones have the same phone load. I also have another CME with the same IOS 12.4(15)T3 running on a Cisco 3800. The DND softkey works on all phones. The only differences are the platform (2821/3800) the IP Phones (7940-7960/7941-7961) and IOS 12.4(15)T3 w/o crypto / IOS 12.4(15)T3 with crypto.

Hall of Fame Super Gold

Re: DND sofkey not working after IOS upgrade for CME 4.1

Also check phone FW, which ones are not working ?

New Member

Re: DND sofkey not working after IOS upgrade for CME 4.1

The App Load(P00308000400), Boot Load(PC0303010200) and Version (8.0(4.0))are the same on all 7960 Phones.

New Member

Re: DND sofkey not working after IOS upgrade for CME 4.1

Thought I would pass this on. Under "Telephony-service" I had to add "hunt-group logout Hlog" After the command is entered you should re-create your "cnf-file" The output says that you should reset your IP Phones but I did not have to. The Dnd softkey begin working right away. I'm running IOS 12.4(15)T3. I hope this helps.

167
Views
0
Helpful
5
Replies
CreatePlease to create content