Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Do i need to confiure dial peer

Hi all,

Need your help, I am configuring the MGCP gateway do i need to configure the POTS dial peer for incoming calls.

Can some one please help me here      

Everyone's tags (5)
3 REPLIES

Do i need to confiure dial peer

Yes, please read this doc:

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf1.html

Rate this if helps you.

Regards

Leonardo Santana

Hall of Fame Super Silver

Do i need to confiure dial peer

If I recall correctly (I have not worked with MGCP for a while) you do not need dial-peers for T1/E1/PRI ports as those get built automatically, but you need dial-peers for analog ports.

Chris

Do i need to confiure dial peer

You can use dial-peer in the MGCP GW when the fallback feature is used.

You don't need icoming dial-peer in a MGCP GW on basic config.

For incoming calls in the CUCM MGCP gateway you must have a CSS with access to you DN partitions and

Alex

429
Views
0
Helpful
3
Replies
CreatePlease to create content