Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Does CCME use G.729 for non-local subnet calls by default ?

Hi,

I cant seem to find this info, but it looks like when I have dial-peers configured on ccme, and I get a call from a non-local subnet, the call seems to use G.729 by default.

Is this the default behaviour for calls that come in to CCME from a non-local subnet ?

Thanks

3 REPLIES
Blue

Re: Does CCME use G.729 for non-local subnet calls by default ?

The codec CME uses is not 'subnet' specific.

With CME, all calls, by default, are g729 for VOIP dial-peers. (g711 for POTS dial-peers)

You can adjust the codecs to be used by using the 'codec' command under your dial-peers.

Another way to allocate codecs is to create a 'voice class codec' and define a list of codecs and their priority for use; then assign the voice class to the dial-peer.

Please see the following link for more information on default CME codec:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmebasic.html#wp1101736

Hall of Fame Super Gold

Re: Does CCME use G.729 for non-local subnet calls by default ?

That is all correct expect that pots DP have no default codec precisely because they are not voip DP.

New Member

Re: Does CCME use G.729 for non-local subnet calls by default ?

Thanks, I did see that link but it only mentions defaults for SIP endpoints.

SCCP->SCCP calls for 2 phones registered use G.711 (no dial-peers involved, as they are ephones)

The document does not seem to be clear as to what is the default for

H.323 (Eg CM originated) --> SCCP endpoint

H.323 (CM Originated) ---> TCL / VXML application

Certainly the best thing to do is specify the codec and remove any doubts.

Thanks

154
Views
0
Helpful
3
Replies