Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Does CM 6.x support several SIP endpoint registrations from one IP address?

Title says it all, so has anybody tested if it is possible to register several (IETF) SIP clients to CallManager from the same IP address? In other words, can you run two or more SIP clients in one PC and register both to CallManager but using different credentials?

2 REPLIES
Silver

Re: Does CM 6.x support several SIP endpoint registrations from

On the line side, SIP running on the Cisco Unified IP Phone models 7905G, 7911G, 7912G, 7940G, 7941G, 7941G-GE, 7960G, 7961G, 7961G-GE, 7970G, and 7971G-GE helps customers participate in systemwide, SIP-directed features such as presence and interoperation with third-party SIP services. In addition, line-side SIP support helps enable Cisco Unified CallManager 5.0 to provision, register, and manage specialty and third-party SIP phones.

http://cisco.com/en/US/netsol/ns340/ns394/ns165/networking_solutions_white_paper0900aecd80422c70.shtml

New Member

Re: Does CM 6.x support several SIP endpoint registrations from

This did not answer my question. I don't want to use Cisco phones, but I want run several 3rd party SIP softphone clients in a PC and register them to CallManager. In this case they all would use same IP. Does this work? (I don't currently have CM installation at hand so I can't test it myself.)

114
Views
0
Helpful
2
Replies