Does WS-F6K-PWR support 802.3af

[lomonaco]

Hi, I'm trying to use module WS-X6348-RJ-45 with WS-F6K-PWR in a 6509 with a Cisco IP Phone 7975G without success.

Just to confirm, Does the sub-module WS-F6K-PWR support 802.3af

Thanks in Advanced

[Rob Huffman · Accepted solution]

Hi Andre,

Sadly, the WS-F6K-PWR only supports Cisco pre-standard PoE.

WS-F6K-PWR

Maximum Power Per Port (W) 6.3

Table 55-5 Efficiency of Voice Daughter Cards

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/configuration/guide/voicecfg.html#wp1057105

The 7975 is a Class 3 device which has;

Required Power (W) 15.4

Hope this helps!

Rob