Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Does WS-F6K-PWR support 802.3af

Hi, I'm trying to use module WS-X6348-RJ-45 with WS-F6K-PWR in a 6509 with a Cisco IP Phone 7975G without success.

Just to confirm, Does the sub-module WS-F6K-PWR support 802.3af

Thanks in Advanced

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Does WS-F6K-PWR support 802.3af

Hi Andre,

Sadly, the WS-F6K-PWR only supports Cisco pre-standard PoE.

WS-F6K-PWR

Maximum Power Per Port (W) 6.3

Table 55-5 Efficiency of Voice Daughter Cards

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/configuration/guide/voicecfg.html#wp1057105

The 7975 is a Class 3 device which has;

Required Power (W) 15.4

Hope this helps!

Rob

1 REPLY
Hall of Fame Super Red

Re: Does WS-F6K-PWR support 802.3af

Hi Andre,

Sadly, the WS-F6K-PWR only supports Cisco pre-standard PoE.

WS-F6K-PWR

Maximum Power Per Port (W) 6.3

Table 55-5 Efficiency of Voice Daughter Cards

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/configuration/guide/voicecfg.html#wp1057105

The 7975 is a Class 3 device which has;

Required Power (W) 15.4

Hope this helps!

Rob

612
Views
0
Helpful
1
Replies
CreatePlease to create content