Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Double-ring for outside calls on VG224 SCCP analog phone

I have many skinny-controlled, VG224-connected, analog phones in a CUCM 6.1(2) environment. They do NOT double-ring to indicate an outside call vs. an inside call. (The IP phones do). Is there a particular command that has to be done on the VG224 ring double-pulse for outside calls?

I've dug but cannot find anything.

THANKS!

3 REPLIES
Hall of Fame Super Red

Re: Double-ring for outside calls on VG224 SCCP analog phone

Hi Michael,

I have checked every VG224 doc that I can find and it doesn't look like Distinctive Ringing is supported :(

Check out the Supplementary Services;

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_data_sheet09186a00801d87f6.html

Hope this helps! It's a bummer

Rob

PS: I have worked with some other NetPros who could not enable this feature with the VG224 :(

New Member

Re: Double-ring for outside calls on VG224 SCCP analog phone

Thanks Rob for looking....I couldn't find mention of it one-way or another, either. Somewhat unbelievable.

New Member

Re: Double-ring for outside calls on VG224 SCCP analog phone

You can have this feature activated by changing the required cptone, eg cptone IN, you can upgrade the VG224 IOS to vg224-i6s-mz.150-1.M.bin

or you can apply the command " ring cadence external " on the voice-port.

rgds,

Gifton

369
Views
7
Helpful
3
Replies