Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Doubt about Configuration Gateway in CCM 5.1

Hi Guys,

My Customer have a solution with CCM version 5.1. Actually the Customer have in the Matriz 02 gateway of Carrier different. He is using Gateway 01 only receive the Calls (In) and Gateway 02 to do and receive (In and Out). Now he need change this scenario, gateway 01 will be only receive the call (In) and gateway 02 will receive and to do call (In and out) My Question is: What configuration need be change in the CallManager to solve this problem?

Thank You,

Wilson

1 REPLY
Cisco Employee

Re: Doubt about Configuration Gateway in CCM 5.1

it's extremely easy to do that

In CUCM it's as easy as not using a GW in any route group or route pattern to not make calls from CUCM, there's nothing else to it

the other is as any regular GW config, use it in a route pattern to make calls

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
112
Views
0
Helpful
1
Replies