Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Doubt about configuration VoIP

My Customer have a gateway model 2801 with 03 analogical lines in fxo interface that are using ro send and receive by pstn.

In this topology there are IP Phone too. My question is: It's possible that a one specific directory number to do call only

by interface 02 fxo?

Thanks,

Wilson Santana

6 REPLIES

Re: Doubt about configuration VoIP

Please provide more information on the protocols and call agents that you are using. It cannot be determined from the information provided.

-nick

New Member

Re: Doubt about configuration VoIP

Hi Nick,

My Customer is using mgcp, the CallManager is version 5.1.3

Thanks,

Wilson

Cisco Employee

Re: Doubt about configuration VoIP

Yes, CSS and partitions

Create route patterns associated to that FXO and make sure only that phone can reach it.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Doubt about configuration VoIP

Hi Java,

I am sorry, but, I don't understand. I am attached the router configuration.

Thanks,

Wilson

Re: Doubt about configuration VoIP

Hi,

Could you please post the confi in .txt format, I cant install the WinRAR on my machine (and so do I think of many others)

Regards

Wilson Samuel

Re: Doubt about configuration VoIP

Hi Wilson,

is: It's possible that a one specific directory number to do call only

by interface 02 fxo?

I didnt understand your question pretty well?

If I understand correctly, all you want is the branch office wants to go to the PSTN using the FXO card and would also like to recieve/make calls on that the FXO card.

If yes, then you have to configure things on the CCM, in order to make it work.

Regards

Wilson Samuel

118
Views
0
Helpful
6
Replies
CreatePlease login to create content